Full house rewire cost UK 2026
Page checked 15 November 2026 · cost ranges compiled September 2026
90 m² internal floor, mid spec
£7,050 – £12,530
Mid £9,790 before VAT, or £11,750 with 20% VAT. No contingency. Typical programme 1–3 weeks.
A full rewire replaces the cables, sockets, switches, light fittings' wiring and usually the consumer unit throughout a house. It is priced here per m² of internal floor, because the number of circuits and the length of cable grow with the house.
Most of the disruption comes from lifting floorboards and chasing walls, so a rewire is often timed with replastering and decorating.
Usually in the band. Cable, consumer unit, sockets and switches, test and cert.
Usually outside the band. Smart-home extras.
CALCULATOR
Run your own full house rewire range
Filter a category, then edit every input that applies to that job.
—
—
| Low in this run | — |
|---|---|
| High in this run | — |
| Size used | — |
| Typical programme | — |
How the mid is built
| Works (after spec, access, region) | — |
|---|---|
| Extras total | — |
| Subtotal ex-VAT | — |
| VAT on this run | — |
| Contingency | — |
| Illustrated mid | — |
Usually in the band.
Usually outside the band.
Not a quote. Planning fees, Party Wall awards, temporary accommodation, furniture and professional fees are omitted unless you tick them. Ground conditions, asbestos, services diversions and hidden rot sit outside every published range.
YOUR RUN FULL HOUSE REWIRE
Change any input and this box follows the live run.
Not a quote. Illustrative planning bands from Rodway Labs, not a tender or professional advice — see the disclaimer.
Full house rewire cost by size and specification
Three sizes — a two-bedroom flat or small terrace, a typical three-bedroom semi and a larger four-bedroom house — at budget, mid and high specification. Figures are ex-VAT unless the column says otherwise, with UK mid-range region, typical suburban access, living in during the works, not listed, no extras ticked and no contingency. Rounded to the nearest £10.
| Size | Budget spec, mid | Mid spec, band | Mid spec, mid | High spec, mid | Mid spec with 20% VAT | Mid per m² |
|---|---|---|---|---|---|---|
| 60 m² internal floor | £5,090 | £4,700 – £8,350 | £6,530 | £9,000 | £7,830 | £110 |
| 90 m² internal floor | £7,630 | £7,050 – £12,530 | £9,790 | £13,510 | £11,750 | £110 |
| 130 m² internal floor | £11,030 | £10,180 – £18,100 | £14,140 | £19,510 | £16,970 | £110 |
Full house rewire cost by region
The mid-spec mid for 90 m² internal floor in each region, using the calculator’s regional factors (see region and access). Other settings as above.
| Region | Mid, ex-VAT | Mid, 20% VAT |
|---|---|---|
| UK mid-range | £9,790 | £11,750 |
| Inner London | £12,720 | £15,270 |
| Outer London | £11,940 | £14,330 |
| South East (ex-London) | £10,960 | £13,160 |
| East of England | £10,280 | £12,330 |
| South West | £10,280 | £12,330 |
| West Midlands | £9,790 | £11,750 |
| East Midlands | £9,300 | £11,160 |
| North West | £9,100 | £10,920 |
| Yorkshire & Humber | £8,810 | £10,570 |
| North East | £8,610 | £10,340 |
| Wales | £8,810 | £10,570 |
| Scotland | £9,100 | £10,920 |
| Northern Ireland | £8,810 | £10,570 |
What moves the price
- Access. An empty house with floorboards up is far quicker to wire than a lived-in, carpeted, freshly decorated one.
- Number of points. Extra sockets, outside lights, data cabling and EV-ready circuits all add time and materials.
- Making good. Replastering chased walls and redecorating are separate jobs; the replaster and decorate projects have their own bands.
- The consumer unit. Usually replaced as part of a rewire; it is also a separate project in the calculator.
Planning, Building Regulations and permissions
A rewire is notifiable electrical work under Part P of the Building Regulations in England and Wales. Use an electrician registered with a competent person scheme, who can self-certify the work and give you an Electrical Installation Certificate; otherwise Building Control must be notified before work starts. An Electrical Installation Condition Report (EICR) on the existing wiring helps decide whether a full rewire is needed.
General information for England unless stated, checked 15 November 2026. Rules differ in Wales, Scotland and Northern Ireland and change over time — confirm with your council, Building Control or the Planning Portal before you start.
Full house rewire cost FAQ
How do I know if a house needs rewiring?
An electrician's Electrical Installation Condition Report (EICR) will say. Old rubber or fabric cable, no earth to lighting circuits or an old fuse box are common signs.
Can I stay in the house during a rewire?
Many people do, room by room, but it takes longer and costs more than an empty house. The living-in setting reflects that.
Does the band include replastering?
No. The band covers cable, the consumer unit, sockets and switches, testing and certification. Replastering and decoration are separate projects in the calculator.
How these figures are worked out
Every figure on this page comes from the Project Cost Lab calculator: a compiled 2026 mid rate for this project, multiplied by size, specification, access, occupation and region, with a band either side of the mid. They are illustrative planning ranges, not quotes, and have no live price feed. Get several written, itemised quotes on the same drawings before you commit. See the methodology and disclaimer.
Related: Consumer unit replacement · Replaster rooms (skim) · Whole-house mid refurb (no extension) · Guide: Region and access · All 57 projects