CATALOGUE

Projects in this lab

Compiled September 2026 mid points before spec, region, VAT and contingency. Open a row for its cost page or to run it in the calculator with your size and extras. Not a price book for a postcode — and not a quote.

Not a quote. Illustrative planning bands from Rodway Labs, not a tender or professional advice — see the disclaimer.

How to use this projects catalogue

This catalogue brings together the project types used by the Project Cost Lab calculator: loft conversions, extensions, boilers, kitchens, windows and other common UK home works. Use the filters to narrow the list, then select a project name to open it in the calculator with a starting point.

Each compiled mid is a baseline before the calculator applies size, specification, region, access, VAT display and contingency choices. It is useful for comparing project shapes, not for predicting the exact cost of one property. For the assumptions behind particular categories, see the loft guide, extension guide, boiler guide, VAT guide and region and access guide.

Projects catalogue FAQ

How should I use a row?

Start with a project that resembles the work you are considering. Open its link to load the calculator, check the default size and then change the quantity, specification and other assumptions to match your early brief.

Why is the mid not a quote?

The mid is the centre of a planning band compiled for a typical starting scenario. Survey findings, design, labour availability, materials, site constraints and the final brief can move a real price substantially, so it is not a tender or a promise.

What do lump, per m², per run and per unit mean?

A lump item is shown as a whole-job starting mid. Area, run and unit items scale by the default quantity shown in the table, such as floor area, metres or individual units. The calculator lets you replace that default where the project allows it.

Where do region, access and specification choices fit?

They are factors applied in the calculator after the catalogue baseline. Use them to describe the broad location, how easy the site is to reach and the level of finish or equipment you have in mind; they are planning adjustments, not a site survey.

What does the VAT display do?

It shows the band at the VAT rate you choose. Most work on an existing home is 20%; qualifying energy-saving installs are 0% until 31 March 2027. See the VAT guide and confirm the rate on the quote.

When should I get real quotes?

Once the scope and access are clear, obtain written, itemised quotes from suitable local firms. For structural, legal or compliance questions, use the appropriately qualified professional; keep this catalogue as an early budgeting aid.

Typical ranges by category

National mid-spec compiled mids at each project’s default size (UK mid-range region, before access, occupation, VAT, contingency and extras), computed from the calculator data. See the methodology.

CategoryProjectsLowest midHighest mid
Lofts5£34,100 (Loft conversion — Velux / rooflight)£84,000 (Loft conversion — mansard)
Extensions7£8,800 (Front porch)£92,000 (Two-storey rear extension)
Conversions5£4,500 (Knock-through (remove a load-bearing wall))£64,000 (Basement conversion (existing cellar))
Kitchens & baths5£4,200 (Utility room fit-out)£15,600 (Kitchen refit (existing footprint))
Roof, windows, walls8£1,080 (Replace guttering & downpipes)£13,050 (External wall insulation)
Garden & drive5£1,700 (Garden fencing)£4,200 (Rear garden landscaping package)
Heat & energy9£720 (Loft insulation top-up)£13,000 (Air-source heat pump (typical house))
Electrics & plumbing5£850 (Consumer unit replacement)£8,550 (Full house rewire)
Decor & finish5£448 (Decorate one room)£2,520 (Decorate whole interior)
Whole house3£67,500 (Whole-house cosmetic refresh)£207,000 (Whole-house structural renovation)
Project How it scales Default size Compiled mid before factors
Loft conversion — Velux / rooflight
Rooflights, insulation, floor, basic stair and finishes. No change to roof shape.
Per m² · m² useful floor22 m² useful floor£34,100 at default size
Loft conversion — rear dormer Cost page
Most common UK loft. Rear dormer box, new floor and a room at mid spec.
Per m² · m² useful floor28 m² useful floor£51,800 at default size
Loft conversion — hip-to-gable
Changes the hip end to a gable. Common on semis and detached houses.
Per m² · m² useful floor30 m² useful floor£61,500 at default size
Loft conversion — L-shape dormer
Rear plus side dormer on a Victorian / Edwardian terrace outrigger.
Per m² · m² useful floor32 m² useful floor£68,800 at default size
Loft conversion — mansard
Full roof-shape change. Almost always planning.
Per m² · m² useful floor35 m² useful floor£84,000 at default size
Single-storey rear extension Cost page
Foundations, walls, roof, openings and a basic fit-out. Kitchen units are an add-on.
Per m² · m² internal20 m² internal£53,000 at default size
Side-return / side extension
Narrow Victorian side-return infill.
Per m² · m² internal10 m² internal£28,000 at default size
Two-storey rear extension
Same footprint, two floors. £/m² usually lower than single-storey.
Per m² · m² total new floor40 m² total new floor£92,000 at default size
Wraparound extension
Rear plus side-return in one volume.
Per m² · m² internal28 m² internal£77,000 at default size
Front porch
Enclosed porch with a door and a small roof.
Per m² · m²4 m²£8,800 at default size
Conservatory (uPVC / aluminium)
Lightweight glazed room on a slab or dwarf wall.
Per m² · m²12 m²£17,400 at default size
Orangery / solid-roof glazed room
Brick piers, lantern roof, better thermal spec.
Per m² · m²16 m²£36,800 at default size
Garage conversion (integral) Cost page
Infilling the door, insulating, flooring and making a habitable room.
Per m² · m²16 m²£13,600 at default size
New single garage (detached)
Base, walls or timber kit, roof, door.
Per m² · m²18 m²£16,200 at default size
Garden room / home office
Insulated cabin or masonry garden office with power.
Per m² · m²12 m²£21,000 at default size
Basement conversion (existing cellar)
Tanking and fitting an existing cellar. Dig-down is a different job.
Per m² · m²20 m²£64,000 at default size
Knock-through (remove a load-bearing wall)
RSJ, padstones, making good.
Scales · Opening width (m)3 £4,500
Kitchen refit (existing footprint) Cost page
Units, worktops, splashback, fitting and making good.
Per metre · linear metres of run6 linear metres of run£15,600 at default size
Family bathroom renovation Cost page
Strip, suite, tiling, ventilation and labour.
Per m² · m²5 m²£12,000 at default size
New ensuite / shower room
Carving a shower room from a bedroom or landing.
Per m² · m²3.5 m²£9,800 at default size
Wet room (level-access)
Tanking, level floor, drainage and a proper wet-room spec.
Per m² · m²4 m²£12,800 at default size
Utility room fit-out
Units, worktop, plumbing for washer / dryer.
Per metre · linear metres3 linear metres£4,200 at default size
Re-roof a house (pitched) Cost page
Strip and re-cover a pitched roof.
Per m² · m² roof slope80 m² roof slope£11,600 at default size
Replace a flat roof
Felt, rubber or fibreglass on an existing deck.
Per m² · m²16 m²£2,880 at default size
Replace windows (uPVC / aluminium) Cost page
Supply and fit. Bay and aluminium/timber sit toward high spec.
Per unit · windows8 windows£6,000 at default size
External doors (front / back / bi-fold pair)
Composite front door mid-spec is the anchor.
Per unit · doorsets2 doorsets£2,800 at default size
Render / external wall finish
Sand-cement or through-colour render.
Per m² · m² elevation80 m² elevation£6,000 at default size
External wall insulation
Insulation + render system on existing masonry.
Per m² · m² wall90 m² wall£13,050 at default size
Driveway Cost page
Tarmac toward budget, block paving mid, porcelain / resin high.
Per m² · m²40 m²£3,800 at default size
Patio / paving
Slabs or porcelain on a prepared base.
Per m² · m²20 m²£1,800 at default size
Decking
Softwood budget, composite mid-to-high.
Per m² · m²16 m²£2,080 at default size
Garden fencing
Closeboard or panel. Brick walls are a different job.
Per metre · linear metres20 linear metres£1,700 at default size
Rear garden landscaping package
Clear, level, lawn or gravel, a path and planting allowance.
Per m² · m² garden60 m² garden£4,200 at default size
Combi boiler like-for-like swap
Same position, Gas Safe, flue and controls. Relocation is an add-on.
Whole job—£2,800
System / regular boiler replacement
Boiler plus associated cylinder work. Not a heat pump.
Whole job—£3,800
Air-source heat pump (typical house) Cost page
Typical 3-bed band. Grants sit outside this range.
Whole job—£13,000
Solar PV array Cost page
Panels plus invertor on a straightforward pitched roof.
Per unit · kWp4 kWp£6,600 at default size
Home battery storage
AC- or DC-coupled battery added to PV.
Per unit · kWh usable5 kWh usable£3,250 at default size
EV charge point (home)
7 kW untethered wallbox on a straightforward run.
Whole job—£950
Loft insulation top-up
Mineral wool to current depth on a clear loft.
Per m² · m² loft40 m² loft£720 at default size
Cavity wall insulation
Blown insulation into a suitable cavity.
Per m² · m² wall80 m² wall£1,760 at default size
Underfloor heating (retrofit a floor)
Electric toward small rooms; water toward larger new floors.
Per m² · m² heated floor20 m² heated floor£2,200 at default size
Full house rewire Cost page
New consumer unit, circuits and sockets through a typical house.
Per m² · m² internal floor90 m² internal floor£8,550 at default size
Consumer unit replacement
Swap the fuse box for a dual-RCD or RCBO board.
Whole job—£850
Replumb hot & cold (typical house)
New pipework to existing points.
Per m² · m² internal floor90 m² internal floor£6,300 at default size
Replace radiators through a house
Supply and fit like-for-like positions.
Per unit · radiators8 radiators£2,240 at default size
Rising-damp / DPC treatment (typical wall run)
Chemical DPC and replastering. Diagnosis first.
Per metre · linear metres of wall12 linear metres of wall£1,140 at default size
Decorate whole interior
Walls and ceilings, existing surfaces in fair condition.
Per m² · m² internal floor90 m² internal floor£2,520 at default size
Decorate one room
Walls, ceiling and woodwork of a single room.
Per m² · m² floor14 m² floor£448 at default size
Replaster rooms (skim)
Skim over existing plasterboard or sound plaster.
Per m² · m² wall + ceiling80 m² wall + ceiling£1,760 at default size
New flooring (supply & fit)
Laminate / LVT budget-to-mid, engineered timber mid-to-high.
Per m² · m²20 m²£1,100 at default size
Wall & floor tiling
Labour plus mid ceramic. Large-format porcelain is high spec.
Per m² · m² tiled12 m² tiled£1,140 at default size
Replace guttering & downpipes
uPVC mid. Cast iron or aluminium is high spec.
Per metre · linear metres24 linear metres£1,080 at default size
Fascias, soffits & bargeboards
uPVC over existing or replace.
Per metre · linear metres24 linear metres£1,680 at default size
Whole-house cosmetic refresh
Paint, flooring, light electrical, worktops. No structural.
Per m² · m² internal floor90 m² internal floor£67,500 at default size
Whole-house mid refurb (no extension) Cost page
New kitchen and bathrooms, some rewire / replumb, full decoration.
Per m² · m² internal floor90 m² internal floor£130,500 at default size
Whole-house structural renovation
Strip back, layout changes, insulation, services, kitchen and bathrooms.
Per m² · m² internal floor90 m² internal floor£207,000 at default size

Whole-job items show a lump mid. Area, run and unit items show mid × default quantity. Treat every figure as a planning band.