Free UK cost ranges · 57 home projects · updated for 2026

Know what your project should cost before you get quotes

Extensions, lofts, kitchens, heat pumps, driveways and more. Set the size, spec, region, access and VAT, and get a low, mid and high band in seconds — free, with no sign-up.

1Pick a job57 UK project types
2Tune itSize, spec, region, extras
3Get a rangeLow / mid / high, VAT shown

Worked example

Illustrative

20 m² single-storey rear extension

Mid spec · UK mid-range · living in · 20% VAT · 10% contingency

Illustrated mid

£80,090

Low£56,063High£104,117

A planning band, not a price. Access, spec, region and VAT move the number more than the project name — use the range to size a budget, then compare written quotes. How the ranges are built.

CALCULATOR

Project cost range — 2026 illustration

Filter a category, then edit every input that applies to that job.

Optional extras for this job

Most work on an existing home is 20%. Installing qualifying energy-saving materials (heat pumps, solar panels, insulation, batteries and so on) in a home is 0% until 31 Mar 2027, then 5% from 1 Apr 2027. A boiler swap does not qualify. See VAT guide and VAT Notice 708/6. This tool does not decide your VAT treatment.

—

—

—

Low in this run—
High in this run—
Size used—
Typical programme—

How the mid is built

Works (after spec, access, region)—
Extras total—
Subtotal ex-VAT—
VAT on this run—
Contingency—
Illustrated mid—

Usually in the band.

Usually outside the band.

Not a quote. Planning fees, Party Wall awards, temporary accommodation, furniture and professional fees are omitted unless you tick them. Ground conditions, asbestos, services diversions and hidden rot sit outside every published range.

EXAMPLE REAR DORMER · UK MID · VAT ON · 10% CONTINGENCY

Change any input and this box follows the live run.

Not a quote. Illustrative planning bands from Rodway Labs, not a tender or professional advice — see the disclaimer.

How to use the calculator

  1. Pick a project. Filter by category, then choose one of the 57 project types. Each has its own size unit — m² of floor, linear metres of kitchen run, a count of windows or radiators, or a whole job.
  2. Enter the size. Use the internal floor area or run length from a drawing or a tape measure. Sizes outside a project’s sensible range are held to its minimum or maximum.
  3. Set the factors. Choose region, specification (budget, mid or high), site access, whether you will live in during the works and whether the house is listed or in a conservation area.
  4. Tick the extras that apply. Professional fees, planning, Party Wall, steels, skips and similar items are shown as separate allowances so you can see what they add.
  5. Choose VAT and contingency. Pick the VAT display that fits your job (the VAT guide explains the rates) and a contingency of 0–25%. Then read the low, mid and high band, not just the mid.

Worked example

A 20 m² single-storey rear extension at mid spec, on a typical suburban plot, with the family living in during the works, UK mid-range region, 20% VAT and 10% contingency, no extras ticked:

StepCalculationMid
Base works20 m² × £2,650 per m²£53,000
Access and living in× 1.06 × 1.08£60,674
RegionUK mid-range × 1£60,674
VAT+ 20%£72,809
Contingency+ 10%£80,090

With the ±30% spread for this project, the illustrated band is £56,063 to £104,117, mid £80,090. Switch the region to South East (ex-London, ×1.12) and the mid becomes £89,701. This is an example of how the arithmetic works, not a price for any real extension.

How the range is worked out

Each project has a compiled mid rate per unit or per job. The calculator multiplies it by your size, then by specification, access, occupation (internal, structural and services jobs only), listed status and region. Low and high sit a set percentage either side of the mid (±22% to ±42%, wider for jobs that vary more, such as kitchens). Fixed extras are scaled by spec and region; fee extras are a percentage of the works. VAT is applied at the rate you choose, then contingency on top. The full factor list is in the methodology.

Edge cases to watch

Calculator FAQ

Is the mid figure a quote?

No. It is an illustrative planning figure. Use it to size a budget, then get written quotes on the same drawing.

Why is my builder’s quote outside the band?

Your survey, design, local market and the contractor’s workload are not visible to the calculator. A quote outside the band is not automatically wrong — ask what it includes.

Should I add contingency?

For most structural work 10–15% is a common planning allowance; older houses and unknown ground often justify more.

How current are the figures?

The bands were compiled in September 2026 and are reviewed under the editorial policy. There is no live price feed.

For a single project’s compiled mid before factors, see the projects catalogue. The calculator’s job is your own scenario; the catalogue’s job is comparison.

What you can price

Every common home project, one calculator

Each type has its own size unit and extras. Open the catalogue for the compiled mid before factors. Figures remain ranges, not quotes.

Popular cost pages

How much does it cost in the UK?

Size, spec and region tables for the jobs people price most, each with the calculator preloaded.

All projects →

Guides

Plain-English guides with numbers

All guides →